02 / Sports Tech · Smart Grip
Every ounce of grip.
Turned into swing data.
A sensor board inside a golf club grip that measures hand pressure and swing motion and sends them to a smartphone app.
It goes into the SGLAB Ggrip, and we handle everything from circuit development to supplying the assembled PCB.
- 8ch
- Grip pressure channels
- 24bit
- Pressure conversion resolution
- 6 + 3axis
- Motion · magnetic sensing
- 4-layer · 1.0mm
- Build-up PCB
01 / Product
The club stays the same.
The data is new.
Ggrip is a smart golf club with sensors, wireless charging and AI built in. It tracks face angle, club path, speed and tempo in real time and connects to an app over Bluetooth for personalized coaching. It keeps the shape, weight and balance of a standard club, and won a CES 2025 Innovation Award in Fitness & Sports.
- SWINGA swing trainer with swing path analysis and training modes
- SWING PLUSA grip and swing trainer that analyzes grip pressure and swing path together
- REGRIPA custom grip that brings Ggrip to your own club
Product information: SGLAB Ggrip website ↗
02 / Design Scope
Inside the grip you hold.
Sensing, wireless and charging on one board.
The pressure measurement circuit, motion sensors, BLE radio and charging power fit on a single 4-layer build-up board.
- 01
8-channel grip pressure
Small signals from eight grip pressure channels are amplified, filtered and converted at 24-bit resolution.
- 02
Motion and heading
A 6-axis motion sensor and a 3-axis magnetometer measure the swing and the club orientation.
- 03
BLE radio and antenna matching
A BLE RF IC connects to the smartphone app, and the antenna matching was tuned on the prototype.
- 04
USB-C charging and power
One power management IC handles USB-C charging, battery management and the supply rails.
- 05
Analog and digital separation
The pressure section has its power and ground separated from the digital circuitry to keep measurement noise down.
- 06
Haptics and a compact board
A vibration motor gives haptic feedback, and the 4-layer 1.0mm build-up board fits inside the grip.
03 / Block Diagram
Signals meet at the RF IC.
Data goes to the app.
Grip pressure and motion data meet at the RF IC and go to the smartphone app over BLE.
04 / Process
From a test circuit.
To boards we supply.
- Jun 2026 · Circuit designThe main circuit was designed from a test pressure measurement circuit.
- Jul 2026 · Pressure sectionThe pressure measurement circuit was reinforced.
- Aug 2026 · RF tuningAntenna matching was tuned on the prototype and applied.
- PCB assembly supplyWe supply fully assembled boards.
From Sensor to Product
Sensors and wireless in a small device.
From circuit to assembled board.
Tell us what you need to measure and how much space you have.
