// RF_KNOWLEDGE_BASE — RF & ANTENNA TUNING
← Back to RF FAQ What layout tips minimize SMPS switching noise interference on 2.4GHz RF receiver sensitivity (RSSI)?
// RF_DB_QUERY: RESOLVED
SYS_OK
Isolate the RF ground plane from the power supply ground plane, connecting them at a single point via a ferrite bead. Place decoupling capacitors as close to the RF IC power pins as possible to filter high-frequency switching ripples.
// NEED_RF_ENGINEERING_SOLUTION?
Are you facing custom hardware design or RF interference challenges? 31NS-Tech leverages over 20 years of real-world expertise to engineer specialized solutions.
Request Technical Consultation